Ridges Made Secure

Rebedding Roof Tiles
So Ridge Caps Sit Firm

Rebedding roof tiles resets loose ridge and hip caps on fresh bedding, so they sit firm and keep water out. We lift the caps, clear away old crumbling mortar, reset each cap in line, and finish with flexible pointing. Our owner is on site for every job, and every quote is fixed and in writing.

25+ Years In The Trade
Licenced and Insured To Meet Australian Standards
Our Owner On Site For Every Job
Quality-Assured Workmanship

Schedule Your Free Inspection

No Fees. No Obligation. Open 7 Days a Week.

    No spam. We respond within 2 business hours.
    Rebedding Roof Tiles
    Know Your Roof

    What Is Roof Tile Bedding?

    On a tiled roof, the ridge and hip caps sit on a bed of mortar that fills the gap between the caps and the tiles below. This bedding holds the caps in place and seals the gap against water, wind, and pests.

    Over the top of the bedding sits the pointing, a thinner layer that seals the edge. When the bedding itself breaks down, pointing alone cannot hold the caps firm, and rebedding roof tiles is the fix.

    Rebedding Roof Tiles
    Spot the Signs

    Why Ridge Bedding Breaks Down

    Traditional bedding is a sand and cement mix. It is strong but rigid, so over the years it cracks and crumbles because of:

    • Heat and cold: The roof expands and contracts every day.
    • Roof movement: Houses settle, and timber frames shift slightly.
    • Water getting in: Through cracked pointing, which washes out the bedding.
    • Age: Most original bedding lasts decades, then gives out.
    Rebedding Roof Tiles
    Done Properly

    How We Rebed Roof Tiles

    Rebedding roof tiles is careful, hands-on work. Our process is:

    • Lift the caps: Each ridge or hip cap is removed and set aside.
    • Remove old bedding: Crumbling mortar is cleared back to a sound base.
    • Lay fresh bedding: A new bed is laid along the ridge line.
    • Reset the caps: Each cap is pressed into place, straight and evenly spaced.
    • Apply pointing: Flexible pointing seals the edges and holds the caps firm.
    cement tiles painting
    Hips and Gables

    Hips, Gable Ends, and Apex Points

    Ridges are not the only place that needs bedding. Hips run down the corners of the roof, gable ends finish the sides, and apex points join several ridges. These areas take the brunt of the wind and often fail first.

    When rebedding roof tiles, we check each of these areas and include any that need work, so the whole roof is secure.

    Rebedding Roof Tiles
    Matched Caps

    Replacing Broken Ridge Caps

    Caps are sometimes cracked or broken when bedding fails, or they were damaged years ago. We replace broken caps with matching profiles where possible, so the ridge line looks consistent.

    We also replace any cracked tiles beside the ridge, as these are often damaged when old bedding pushes them out of line.

    Roofing Restoration Service Melbourne
    Fixed Written Quotes

    What Affects the Cost of Rebedding Roof Tiles

    The cost of rebedding roof tiles depends on:

    • Length of ridges and hips: Measured in lineal metres.
    • Roof pitch and height: Steeper and taller roofs take longer.
    • Broken caps: How many need replacing.
    • Partial or full: Whether some or all ridges need rebedding.

    Contact us for a free inspection and fixed quote. See our roof rebedding page for more.

    PROCESS

    Our Process for Rebedding
    Roof Tiles

    Careful, hands-on work that holds your ridges firm.

    01
    Step 01

    Inspect ridges and hips

    We check every cap for movement and cracking.

    02
    Step 02

    Lift caps

    Each cap is removed carefully.

    03
    Step 03

    Clear old bedding

    Back to a sound base.

    04
    Step 04

    Rebed and reset

    Caps set straight on fresh bedding.

    05
    Step 05

    Point and clean up

    Flexible pointing applied and debris removed.

    Ready to get started? Step 1 takes less than 2 minutes.

    Frequently Asked Questions About Rebedding Roof Tiles

    Answers about what rebedding is and why it matters.

    Get a Free Quote
    What does rebedding roof tiles mean?

    It means lifting the ridge or hip caps, removing old mortar, and resetting them on fresh bedding.

    How do I know if my roof tiles need rebedding?

    Look for loose or misaligned caps, mortar in the gutters, or leaks near ridges.

    Is rebedding the same as repointing?

    No. Repointing seals the edge. Rebedding replaces the mortar the caps sit on.

    Do you rebed hips and gable ends?

    Yes. We check and rebed all areas that need it.

    What happens to broken ridge caps?

    We replace them with matching caps where possible.

    How long does rebedding take?

    Most homes take one to two days, depending on the ridge length.

    WHY US

    Straight Advice. Careful Work. No Roofing Nonsense.

    Choosing a roofer can feel risky. We get that. You want someone who turns up, tells the truth, respects your home, and does the job properly. That is how we work.

    01

    We Explain Things Clearly

    We do not bury you in jargon. We show you what is happening, explain why it matters, and talk through your options.

    02

    We Respect Your Property

    Your home is not a worksite to us. It is your home. We take care around gardens, driveways, older features, fragile roof materials, and neighbouring properties.

    03

    We Understand Melbourne Roofs

    From inner-city terraces to suburban family homes, Melbourne roofing is not one-size-fits-all. We account for roof pitch, age, material, drainage, local exposure, and council considerations.

    04

    We Fix The Cause, Not Just The Leak

    A quick patch might hold for a while, but it often misses the real issue. We look properly so you can make a smart decision.

    05

    Our Owner Is On Site for Every Job

    You are not left dealing with a random crew and hoping for the best. Our owner is on site for every job to oversee the work, answer questions, and make sure our standards are met. It means better communication, better care, and a roofing job done the way we promised.

    0+
    Years Of Experience
    0
    Days A Week Available
    Available 7 Days A Week

    Not Sure What Your Roof Needs? Let Us Take A Proper Look.

    If you have noticed a leak, loose tiles, sagging gutters, cracked mortar, ceiling stains, or storm damage, do not wait until the next downpour tests it again.

    We will inspect your roof, explain the issue clearly, and help you choose the right fix.

    No Fees
    No Obligation
    Our Owner On Site
    Honest and Transparent Advice

    We Service All of Melbourne

    Based in Cairnlea, we provide our services to all suburbs across Melbourne. Distance is never a problem. We are open 7 days a week.

    Schedule Your Free Roof Inspection

    Ensure your home’s safety by telling us when we can inspect your roof. No obligation. No fees. Here 7 days a week when you need us.

    Reach Out to Us

    Whether you have a roofing emergency, want a free inspection, or just need honest advice, we are available 7 days a week.

    No Obligation
    Fast Response
    Free Inspection
    25+ Years Experience

    Tell Us What You Need

    Let us know how we can help you.

      Your details are secure and never shared with third parties.